Linear Feet Calculator for Countertops
By the Linear Feet Calculator Team | Reviewed by kitchen and bath remodeling professionals | Updated June 2026
Kitchen countertops are sold by the linear foot because the depth is standardized at 25.5 inches. Use this calculator to estimate total linear feet for your kitchen layout by entering each section's length.
🔲
Linear Feet for Countertops
Calculate linear feet for countertops
Include each run, island, and peninsula
How Fabricators Measure Countertops
Stone fabricators and kitchen remodelers measure countertops along the back wall for each section. Here's what they include in the linear footage:
- Main runs: Measure the full length of each countertop run along the back wall, including the space over dishwashers and trash pull-outs.
- Islands and peninsulas: Each is a separate section. The length is the long side of the island.
- Overhangs: Standard 1.5-inch overhang is baked into the 25.5-inch depth. Bar overhangs (12-18 inches) are typically priced separately or as an upgrade.
- Seams: Stone slabs max out at about 120-130 inches (10-11 feet). Sections longer than this will require a seam. Fabricators add 10% for seam matching and waste.
Countertop Material Cost Per Linear Foot
| Material | Price/LF (Installed) |
|---|---|
| Laminate | $30 – $60 |
| Granite | $80 – $175 |
| Quartz | $90 – $200 |
| Marble | $100 – $250 |
| Butcher Block | $40 – $90 |
| Solid Surface | $50 – $100 |
Prices based on national averages from Angi and HomeAdvisor, 2026. Prices include templating, fabrication, and installation.